8 PON Ports XG/XGS-PON OLT
PTF3808E
1. Product Description
PTF3808E isa 1U rack-mounted 8-PortXG(S)-PON OLT, compliant with ITU-T G.9807 (XGS-PON), ITU-T G.987 (XG-PON). It can provide two bandwidth access modes:①asymmetric mode: upstream 2.5Gbps, downstream 10Gbps;②symmetric mode: upstream 10Gbps, downstream 10Gbps.The 8 XG(S)-PON port OLT adopts a high-performance chipset solution and has very powerful performance. It has rich interfaces. Provides 1*GE (RJ45) + 4*25GE (SFP28) + 2*100GE (QSFP28) uplink ports to achieve full-speed data forwarding; provides 8*XG(S)-PON downlink interfaces, the maximum splitting ratio is 1:256, and can be connected User ONT.
2. Features:
Ø 1U 19 inch standard box XG(S)-PON OLT with8 PON ports
Ø High performance chipset (Broadcom + NXP chipset solution)
Ø 4x Bandwidth compared to traditional GPON OLT
Ø High-Speed Uplink(100Gbps QSFP28)
Ø Provides 8*XG(S)-PON downlink interfaces for full line-speed data forwarding
Ø Maximum splitting ratio of 1:256 meet the demand for broadband
Ø IPv4 /IPv6 ,Support IPv6 Ping,IPv6 Telnet,IPv6 routing
Ø Port Status monitoring and configurationmanagement
Ø Online ONT configuration and management
Ø User and alarm management
Ø 32K Mac address, Support VLAN tag/Un-tag, VLANtransparent transmission and QinQ
Ø QoS based on port, VID, TOS and MACaddress
Ø Support static LACP,Dynamic LACP
Ø DHCP server,DHCP relay,DHCP snooping, DHCP option82
Ø IGMP snooping, 2048 Groups
Ø Support static routing, dynamic routing RIP v1/v2, RIPng and OSPF v2/v3;
Ø Support ACL based on source IPaddress, destination IP address, L4 port, protocol type, etc;
Ø Two power supplyredundancy design
Items |
Unit |
Specifications |
PON standard. |
|
ITU-T G.9807(XGS-PON) , ITU-T G.987(XG-PON) |
PONinterface |
|
8*SFP+ Slots (8* XG-PONor XGS-PON) Transmission Distance:20KM XG-PON port speed:Upstream 2.488Gbps, Downstream 9.953Gbps XGS-PON port speed:Upstream 9.953Gbps, Downstream9.953Gbps 1:256(Maximum), 1:128(Recommended) Connector:SC/UPC |
Wavelength |
nm |
Tx1577, Rx 1270 |
Uplink |
QSFP28 |
2* (25GE) |
SFP28 |
4* (25GE/50GE/100GE) |
|
RJ45 |
1*1000M/100M/10M (RJ45) |
|
Management |
|
1*10/100/1000M out-band LAN port SNMP,Telnet,CLI,WEB,SSH v2; Fan Group Control Port Status monitoring and configuration management Online ONT configuration and management User management Alarm management |
CONSOLE port |
|
1*CONSOLE port |
USB |
|
1*USB3.0 |
Backplane |
Gbps |
970 |
Port Forwarding Rate |
Mpps |
598.176 |
MAC table |
K |
32 |
L2 |
|
Support 4096 VLANs Support port VLAN Support VLAN tag/Un-tag, VLAN transparent transmission Support VLAN translation and QinQ Support storm control based on port Support port isolation Support port rate limitation Support 802.1D and 802.1W Support static LACP,Dynamic LACP Access control list IEEE802.x flow control Port stability statistic and monitoring |
L3 |
|
ARP proxy 4096 hardware Host Routes,512hardware Subnet Routes Support Radius, Tacacs+ Support IP source protection Support static routing, dynamic routing RIP v1/v2, RIPng and OSPF v2/v3 |
IPv6 Feature |
|
Support NDP; Support IPv6 Ping,IPv6 Telnet,IPv6 routing; Support ACL based on source IPv6 address, destination IPv6 address, L4 port, protocol type, etc; Support MLD v1/v2 snooping(Multicast Listener Discovery) |
Multicast |
|
IGMP snooping 2048 IP Groups |
DHCP |
|
DHCP server,DHCP relay,DHCP snooping DHCP option82 |
QoS |
|
Support LACP, QoS based on port, VID, TOS and MACaddress |
Operating condition |
℃ |
Operating temp: 0 ~ +55 |
Storing condition |
℃ |
Storing temp: -40 ~ +85 |
Humidity |
% |
5~90(non-condensing) |
Power Supply |
|
AC 100~240 V, 50/60 Hz or DC -48V |
Power consumption |
W |
≤150 |
Surge Protection |
V |
6000 (Power supply) |
V |
4000 (interface) |
|
Dimension |
mm |
442mm×330mm×44mm(L×W×H) |
Net weight |
Kg |
4.2Kg |
详情
详情
详情
详情
详情
详情
详情
详情
详情
详情
详情
详情
详情
详情
全国服务热线
地址 : 博罗县罗阳街道鸿达五路广东飞通工业园2楼201、3楼301室
电话 : 0752-6818300传真 : 0752-6818300-817邮编 : 516100
版权所有©2022 广东飞通宽带技术有限公司粤ICP备2022049293号